ZingX

Setup and Usage Impressions

The UFO Power Center caught our fancy because power consumption measurement is something we do for almost all products that we review. Using a Kill-a-Watt is not very accurate, while the Watts Up? meters are very costly for our particular purpose. The UFO Power Center is continuing to serve us well. However, with more devices being tested simultaneously, and lab space at a premium, we started looking for something more down to earth in terms of industrial design. The mPower Pro fit our needs perfectly, but Ubiquiti was having some supply issues when we were looking for a unit to test out. In the end, we landed up with the mPower 3-outlet version.

Hardware

The mPower unit comes with a wall mounting plate, screws, a CD with the mFi software and a quick start guide along with the main unit. From the outside, it looks every bit like a conventional power strip. In addition to the circuit breaker reset button on the side, it also has a factory reset button. A flashing LED on the front panel provides status information.

Setup Process

The setup process for the mPower is quite similar to that of the UFO Power Center. When powered up, the device creates an ad-hoc wireless network. Upon connecting a PC to the ad-hoc network, the unit's web UI is accessible. The browser interface allows for selecting and entering credentials for the Wi-Fi network to which the unit is supposed to connect. Our mPower unit was originally running firmware version 1.2.3 , but upgrading to 2.0.7 brought a lot of interesting features.

The firmware update could be processed only after linking up the mPower unit with a mFi controller instance. The mFi is a Java-based software which proved very difficult to install on my Windows 8 machine. It also got complicated a bit because I had mFi installed on multiple computers on the same network (not the usual scenario for most end-users). I eventually got it working on a Windows 7 setup. The default credentials for the unit are printed on the box (ubnt/ubnt). However, linking the unit to a mFi instance overrides these credentials with those used for the mFi.

Using the mPower

The controller software is a full-fledged automation suite with support for rules and other features. It will not be covered in detail because this review is about the mPower unit specifically. Suffice to say that all the parameters of the mPower unit (names and status of the outlets, power consumption recording etc.) can be viewed, recorded, used for rules and altered as applicable through the mFi interface.

The browser interface for the mPower in the firmware version 1.2.3 was minimal and only provided statistics related to the network connection and some logs related to it. In 2.0.7, the Controls tab was introduced and this provides a way for users to control outlet status and check up on the instantaneous values of the electrical parameters (as shown in the gallery above).

ncG1vNJzZmivp6x7orrAp5utnZOde6S7zGiqoaenZIR2f49orJuhoaq2tbWMp5ytr5%2BnuLR5zJ%2BgZqWgpMSmvoywoJ%2BhXaW8uLHRZqqtqpmlerOx1aKcsGdi